RE: Trying again....

[Replies] [Reply] [View by Thread] [Help]
[Back To Hardware forum]

Are you using PC-2700 DDR-RAM? Are you using an MSI board? If you are using DDR-333 and its an MSI board, clear the BIOS, boot up the pc and set the DDR frequency to 133MHZ (266) or 150MHZ (300). I had that problem once, I tried some cooling with copper heatsinks on the RAM but it persisted and it runs OK on other boards, otherwise, its the RAM's problem, not the board.

Replies:

Trying again.... - 2nd Lt warlordx 2003-08-25 12:05:52
- >RE: Trying again.... - Guest(Picobyte) 2003-08-26 12:48:51 <
- might need to send the bios in for a reflash... - LtKer N3cro 2003-08-25 20:56:32
- RE: Trying again.... - Gen wewalkin 2003-08-25 13:12:17
  - RAM specs..... - 2nd Lt warlordx 2003-08-29 19:14:07
    - RE: RAM specs..... - Gen wewalkin 2003-08-30 14:56:05

CyberArmy::Forum v0.6
Generated In 0.05129 seconds